Systems
 
 

Dryvit’s Textured Acrylic Finish Systems (TAFS) have been developed for use over Insulated Concrete Form (ICF) buildings. Insulated Concrete Forms (ICFs) are a high-performance wall system consisting of lightweight, interlocking expanded polystyrene forms, which remain in place after the concrete is poured.  As an integral part of the wall, the polystyrene forms are also the ideal substrate for Dryvit’s Textured Acrylic Finish Systems (TAFS).  Together, the two products provide a strong, quiet, energy-efficient and beautiful wall, which meets and exceeds current building regulations.

Dryvit One Coat Render (monocouche) is a widely used through coloured one coat render. It is an advanced polymer modified render system which is available in a standard range of nine attractive colours. This system utilise market leading technology in the formulation, which provides excellent workability on site whilst providing a durable and aesthetically attractive finish. The use of a very high quality colour pigmentation also ensures a long and durable level of colour stability.

Prefabricated External Wall Insulation (EWI) system options from Dryvit offer fast track installation for use on either new build or refurbishment projects. These prefabricated systems possess the same benefits as site applied EWI system but in addition offer factory controlled quality and rapid installation unhindered by environmental conditions that would normally affect traditional building methods. Prefabricated panels can be installed of mast climber or mobile towers, reducing access time and cost.

Refer to System Sheets for a guide to each system build-up see below.

Dryvit ACR systems and the Cement Board MD Finish System are a range of 100% acrylic polymer based anti-crack renders designed to outperform the shrinkage and cracking characteristics of traditional renders. The range offers a variety of coloured and textured coating options providing various levels of protection when used in the different component combinations.

Dryvit ACR systems are generally installed over a Dryvit polymer modified re-profiling mortar where levelling is required, on to exterior concrete, brickwork, blockwork, plastered or painted surfaces in new build or refurbishment projects. Dryvit ACR systems often compliment our range of EWI systems where either insulation is not a requirement or where robust detailing is necessary.

The Cement Board MD Finish System incorporates an exterior grade cement board fixed to vertical batons and is ideal where a cavity system is called for without the need for exterior insulation. This system is commonly applied over timber or steel framed substrates, incorporating an approved sheathing and breather membrane on new build residential and low-rise commercial projects.

Refer to System Sheets for a guide to each system build-up see below.

External Wall Insulation (EWI) is an extremely effective method of insulating buildings. The systems are based on a simple premise…insulation is more cost effective when placed on the exterior of a building. EWI comprises a continuous layer of insulation that is fixed adhesively and/or mechanically to the outside of a building. The insulation is then coated with a decorative weatherproof render which can be finished in a wide array of textures and colours allowing you freedom to create the desired aesthetics for your building. By bringing insulation to the outside of external walls it eliminates thermal bridges; reduce air, wind and moisture penetration through the systems; stabilise interior environments and minimise thermal shock. Refer to System Sheets for a guide to each system build-up see below.

Subcategories

External Wall Insulation (EWI) is an extremely effective method of insulating buildings. The systems are based on a simple premise…insulation is more cost effective when placed on the exterior of a building. EWI comprises a continuous layer of i...
Prefabricated External Wall Insulation (EWI) system options from Dryvit offer fast track installation for use on either new build or refurbishment projects. These prefabricated systems possess the same benefits as site applied EWI system but in a...
Dryvit ACR systems and the Cement Board MD Finish System are a range of 100% acrylic polymer based anti-crack renders designed to outperform the shrinkage and cracking characteristics of traditional renders. The range offers a variety of coloured...
Dryvit One Coat Render (monocouche) is a widely used through coloured one coat render. It is an advanced polymer modified render system which is available in a standard range of nine attractive colours. This system utilise market leading technolo...
Dryvit’s Textured Acrylic Finish Systems (TAFS) have been developed for use over Insulated Concrete Form (ICF) buildings. Insulated Concrete Forms (ICFs) are a high-performance wall system consisting of lightweight, interlocking expanded polyst...